CUHK Quick Setup Guide
Although I used to be an RA at CUHK, it still cost me nearly two weeks to setup everything on my desktop. Here is the recording.
I have used Arch Linux on my laptop for more than 2 years. Arch Linux is a perfect Linux distros, except its stability, which always leads to annoying problems. Even now when I try to shutdown my laptop, the screen will freeze so I have to hold the power button to force a shutdown. Gentoo, on the contrary, is a great choice for me. Moreover, my office has 24h electricity supply; my desktop has a powerful 4-core Xeon CPU. Anyway, long-time compilation is acceptable.
Choose the right installation medium
The official Minimal CDs are incapable of booting in UEFI mode. They boot in BIOS (MBR) mode only. If you want to make your system UEFI bootable, you must download the Hybrid ISO (LiveDVD). For me, another advantage of using LiveDVD is that it contains many nice wallpapers.
Every desktop in CSE department uses static IP address. However, the Gentoo Installation Guide doesn’t provide enough information about the configuration for static addresses. A useful document is here: Gentoo Linux x86 Handbook: Network configuration
According to ANSR Lab Wiki, I can get access to the Internet. But I can’t use
git clone over ssh protocol.
As far as I know, all of these problems are unresolvable. However, we can use this command to rewrite the default protocol of Github:
git config --global url.https://github.com/.insteadOf git://github.com/
And set the proxy of git:
git config --global http.proxy http://proxy.cse.cuhk.edu.hk:8000 git config --global https.proxy https://proxy.cse.cuhk.edu.hk:8000
UPDATE on Jan 17, 2018: Actually we can use
git clone through ssh, just add the following configurations to the file
Host github.com User git HostName github.com ProxyCommand nc -x socks.cse.cuhk.edu.hk:1080 %h %p
nc command must be OpenBSD version, otherwise you will get an error message like this:
nc: invalid option -- 'x'
The printer in my office is a Windows printer via SAMBA, so the first thing is to install
samba and the HP printer driver
For Arch Linux and Gentoo, you can install
system-config-printer. Its GUI is similar to
System Settings -> Printers on Ubuntu.
If you don’t set your search domain, the printer address should be
smb://NTSVR6.cse.cuhk.edu.hk/lp120. Or you can set your search domain by adding the following line in
The most important thing is that you have to change your password upon first login. You need a Windows PC in CSE department. Log in with your initial password, and the system will return a message saying that you need to change your password. Then click “OK” button (Do NOT click “Cancel”!) and you can input your new password.
You can use ssh to connect to the Unix/Linux servers in CSE department. For example:
# if you've set the search domain, you can omit ".cse.cuhk.edu.hk" ssh [email protected]
To change your password, use
yppasswd command. Somehow, I can’t change my password on
linux1 with the following error:
No such map yppasswd: unknown user (uid=4960).
Jack Lee told me to try
solar1 and problem solved.
After you connect to a Unix/Linux server, create a directory named
www in your home directory. Now you can upload your personal website in it. Note that you need to set permission at least 755:
chmod -R 755 www
Use WiFi on my desktop
As I mentioned above, many ports have been disabled by our department. Therefore, I can’t use
ftp and so on. It’s very disgusting, you will find yourself be magically blocked from time to time.
Luckily, I have a 360 WiFi version 2, a wireless USB adapter. Current Linux kernel (4.9.34) contains its driver. You can find it at
# load the module modprobe mt7601u # find the interface of wireless network, for me, it's wlp0s20u14 ip link # activate the network interface ip link set wlp0s20u14 up
By default, Gentoo uses
netifrc to control network interfaces, but I can’t utilize it for both Ethernet and WiFi because they have different DNS, search domain, etc. So I installed
nm-applet to manage them. Don’t forget to remove existing netifrc scripts from controlling network interfaces, see the wiki
Note that when you use WiFi, you need to disable your proxy settings:
unset http_proxy unset https_proxy unset ftp_proxy unset rsync_proxy unset socks_proxy unset no_proxy